Programming the wind/sun solar sensor
Created by: Petr Strizheus
Modified on: Mon, 25 May, 2020 at 4:26 PM
To program the remote, follow the steps outlined below.
- Press the P2 button on the awning remote. The awning will "jog"
- Press the P2 button again and the awning will move one more time
- Now press the P2 button on the sun wind sensor and the awning will "jog" one last time to let you know it has been programmed correctly.
Did you find it helpful?
Sorry we couldn't be helpful. Help us improve this article with your feedback.