Programming the LM171 Wireless Keypads is an easy process.  Here is a step by step guide to program and change your password. 


1. Press button “ LEARN” on Control Panel of Gate Opener on the Gate #1

2. The LED on the control panel will be light and then turn off

3. Input password, press button ◄ ( the initial password is 11 ) 

4. The LED starts to flash and then turns off

5. Programming is complete

6. Input password & press button ◄ to open the gate #1


How to program Keypad to Gate #2 ( max 100 remotes ) 

1. Press button “ LEARN” on Control Panel of Gate #2

2. The LED on the control panel will be light and then turn off

3. Input password, press button ►( the initial password is 22 ) 

4. The LED start to flash and then turn off

5. Programming is complete

6. Input password & press button ► to open the gate #2

 

How to change the password to Gate #1: 

1. Press button “0” and hold it

2. Press button ◄

3. Release button ◄, release button “0”

4. Input current password, press button ◄

5. Input new password ( max 8 digits ), press button ◄

6. Re-enter new password, press button ◄

7.  Password has been changed


How to change the password to Gate #2: 

1. Press button “0” and hold it

2. Press button ►

3. Release button ►, release button “0”

4. Input current password, press button ►

5. Input new password ( max 8 digits ), press button ►

6. Re-enter new password, press button ►

7. Password has been changed